Type AH

Ventilation grilles, made of aluminium, with fixed horizontal blades – also for horizontal runs

Single ventilation grilles and horizontal run sections with special profiled blades

  • Nominal sizes 225 × 75 – 1225 × 425 mm and horizontal run sections
  • Volume flow rate range 10 – 1235 l/s or 36 – 4446 m³/h
  • Grille face made of aluminium with anodised finish
  • Front border, 20 mm or 28 mm wide
  • Straight (0°) or angled (15°) air discharge
  • Concealed screw fixing


Optional equipment and accessories

  • Grille face in RAL CLASSIC colours
  • Installation subframe
  • Installation subframe for fitting filter media
  • Attachments for volume flow rate balancing and air direction control
  • Spring clip fixing or countersunk holes (only for 28 mm wide front border)

AH-0-A/825×225 00137411_0


  • Application
  • Description

Application

  • Ventilation grille of Type AH as supply air or extract air variant for comfort zones and industrial zones
  • Directed supply air discharge for mixed flow ventilation
  • Blades for straight (0°) or angled (15°) air discharge to meet different local requirements
  • For variable and constant volume flows
  • For supply air to room air temperature differences from –12 to +4 K
  • For installation in walls, sills and rectangular ducts

Special characteristics

  • Fixed blades
  • Front border in two widths
  • Concealed screw fixing, spring clip fixing or countersunk holes
  • Also for continuous horizontal runs
  • Optional installation subframe and casing for the fitting of filter media

Nominal sizes

Single grille

  • Nominal length: 225, 325, 425, 525, 625, 825, 1025, 1225 mm
  • Nominal height: 75, 125, 225, 325, 425, 525 mm


Horizontal run section

  • Nominal length of end section: 960, 1130, 1310, 1490, 1670, 1850 mm
  • Nominal length of middle section: 2000 mm
  • Nominal height: 75, 125, 225, 325 mm


Other dimensions upon request

Variants

  • AH: Single grille
  • E-AH, M-AH: Horizontal run section


Front border

  • 28 mm wide
  • 20 mm wide


Fixing

  • Concealed screw fixing
  • E11: Concealed screw fixing (20 mm)
  • A11: Countersunk holes (only 28 mm)
  • B11: Spring clip fixing (28 mm)
  • F11: Spring clip fixing (20 mm)

Parts and characteristics

  • Rectangular profile border sections
  • Fixed horizontal blades
  • Vertical lateral mullions
  • Factory fitted perimeter seal
  • Vertical centre mullion for nominal lengths over 625 mm

Attachments

  • AG, AS, D, DG: For volume flow rate balancing and for air direction control

Accessories

  • Installation subframe: For the fast and simple installation of ventilation grilles
  • Filter casing: Frame with filter element and spring clip fixing (only with 28 mm wide front border)

Construction features

  • 20 mm or 28 mm wide border
  • Blades for straight (0°) or angled (15°) air discharge

Materials and surfaces

  • Border and blades made of aluminium
  • Border and blades anodised, E6-C-0, natural colour
  • P1: Border and blades powder-coated, RAL CLASSIC colour

Standards and guidelines

  • Sound power level of the air-regenerated noise measured according to EN ISO 5135

Maintenance

  • Maintenance-free as construction and materials are not subject to wear
  • Inspection and cleaning to VDI 6022

Technical information

Function, Technical data, Quick sizing, Specification text, Order code

  • Function
  • Technical data
  • Quick sizing
  • Specification text
  • Order code

Functional description

Ventilation grilles are air terminal devices for the supply air and extract air of ventilation and air conditioning systems. They direct the supply air into the room. Ventilation grilles with adjustable blades allow for adapting the discharge direction to the local conditions. The result is a mixed flow ventilation in comfort zones and industrial zones, with good overall room ventilation.

Induction slows the airflow down, i.e. the airflow velocity decreases as the distance from the grille increases. The distance at which the airflow velocity reaches a certain defined value, e.g. 0.2 m/s, is called throw distance. The supply air jet from wall grilles that are installed near the ceiling achieves a larger throw distance than a free jet (from a grille that is not installed near the ceiling). Single grilles, groups of grilles and continuous horizontal runs all achieve different throw distances.

In cooling mode it is necessary to take account of the jet deviation towards the occupied zone, which increases as the supply air to room air temperature difference increases and the discharge velocity decreases. In heating mode the supply air jet deviates towards the ceiling. This has no negative effect on the airflow velocity in the occupied zone, but it may affect the complete ventilation of the room.

Nominal sizes

225 × 75 to 1225 × 425 mm

Horizontal run section

H: 75, 125, 225, 325 mm

Minimum volume flow rate

10 – 410 l/s or 36 – 1476 m³/h

Maximum volume flow rate, with LWA max. 40 dB(A) without attachments

55 – 1235 l/s or 198 – 4446 m³/h

Supply air to room air temperature difference

–12 to +4 K

Volumen flow rates for single grille for supply air.


Geometric free area

H L [mm]
H 225 325 425 525 625 825 1025 1225
H Ageo
mm

75

0.004

0.007

0.009

0.012

0.014

0.019

0.024

0.029

125

0.009

0.014

0.020

0.025

0.030

0.041

0.051

0.062

225

 

0.029

0.040

0.051

0.062

0.084

0.106

0.127

325

 

 

0.061

0.077

0.094

0.127

0.160

0.193

425

 

 

 

 

 

0.170

0.214

0.258


Effective air discharge area (supply air)

H L [mm]
H 225 325 425 525 625 825 1025 1225
H Aeff
mm

75

0.006

0.009

0.011

0.014

0.017

0.022

0.028

0.034

125

0.011

0.017

0.022

0.028

0.034

0.044

0.055

0.066

225


0.034

0.044

0.055

0.066

0.087

0.108

0.129

325



0.066

0.081

0.096

0.129

0.169

0.193

425





0.129

0.169

0.214

0.256


Effective area of extract air grille

H L [mm]
H 225 325 425 525 625 825 1025 1225
H Aeff
mm

75

0.004

0.006

0.009

0.011

0.013

0.017

0.021

0.026

125

0.009

0.013

0.017

0.021

0.026

0.033

0.041

0.049

225


0.026

0.033

0.041

0.049

0.066

0.082

0.090

325



0.049

0.060

0.072

0.095

0.120

0.140

425





0.095

0.122

0.155

0.185


AH, volume flow rate ranges 00246683_0

× LWA = 40 dB(A) with unrestricted airflow+ LWA = 40 dB(A) with airflow restricted by 50 %

Ventilation grilles, rectangular, made of aluminium, for supply and extract air. Rectangular profile border. Preferably for wall and sill installation but also suitable for rectangular ducts.

Ready-to-install component which consists of a border and fixed horizontal blades.

Concealed screw fixing, spring clip fixing or countersunk holes, for installation into an installation subframe or fixing onto an installation surface.

Sound power level of the air-regenerated noise measured according to EN ISO 5135.

Special characteristics

  • Fixed blades
  • Front border in two widths
  • Concealed screw fixing, spring clip fixing or countersunk holes
  • Also for continuous horizontal runs
  • Optional installation subframe and casing for the fitting of filter media

Materials and surfaces

  • Border and blades made of aluminium
  • Border and blades anodised, E6-C-0, natural colour
  • P1: Border and blades powder-coated, RAL CLASSIC colour

Technical data

  • Nominal sizes: 225 × 75 to 1225 × 425 mm
  • Horizontal run section, height: 75 – 325 mm
  • Minimum volume flow rate (supply air): 10 – 410 l/s or 36 – 1476 m³/h
  • Maximum volume flow rate (supply air), at LWA max. 40 dB(A) without attachments: 55 – 1235 l/s or 198 – 4446 m³/h
  • Supply air to room air temperature difference: –12 to +4 K

Sizing data

  • V _______________________ [m³/h]
  • Δpt _______________________ [Pa]

Air-regenerated noise

  • LWA _______________________ [dB(A)]

This specification text describes the general properties of the product. Texts for variants can be generated with our Easy Product Finder design programme.

Order example: AH-15-AG/825×225/B1/E11

Attachments

Damper unit, opposed action blades

Blade construction style

15°

Nominal size

825 × 225 mm

Installation subframe

With installation subframe for 20 mm wide front border

Fixing

Concealed screw fixing

Exposed surface

Anodised, E6-C-0, natural colour


Order example: E-AH-0/1310×225

Section

End section

Attachments

None

Blade construction style

Nominal size

1310 × 225 mm

Installation subframe

Without

Fixing

Concealed screw fixing, 28 mm wide front border

Exposed surface

Anodised, E6-C-0, natural colour


Order example: AH-EF-0-AS/1025×125/P1-RAL 9010

Blade construction style

Attachments

Hit and miss damper

Nominal size

1025 × 125 mm

Exposed surface

Powder-coated RAL 9010, pure white


 

Dimensions and weight, Product details

  • Dimensions and weight
  • Product details

The weight table shows the available nominal sizes

AH, single grille

H L [mm]
H 225 325 425 525 625 825 1025 1225
H m
mm kg

75

0.3

0.4

0.5

0.7

0.8

1.0

1.2

1.5

125

0.5

0.7

0.9

1.1

1.3

1.7

2.1

2.5

225


1.3

1.6

2.0

2.4

3.1

3.8

4.6

325



2.4

2.9

3.4

4.5

5.5

6.7

425





4.5

5.9

7.3

8.7

Weights apply to ventilation grilles without attachments


AH, horizontal run section

H Section
H E M
mm kg/m kg

125

4.1

8.2

225

6.1

12.2

325

8.2

16.4

Middle section M: 2000 mm

End section E: 950 – 2025 mm in increments of 1 mm

Weights apply to sections without attachments


Installation examples, Installation details, Commissioning, Basic information and nomenclature

  • Installation examples
  • Installation details
  • Commissioning
  • Basic information and nomenclature
Wall installation 00153775_0

Nominal length over 625 mm: with vertical centre mullion

Installation and commissioning

  • Installation preferably in walls, sills and rectangular ducts
  • Installation with installation subframe is recommended
  • If no installation subframe is used, the border should be fixed with screws


These are only schematic diagrams to illustrate installation details.

Volume flow rate balancing

When several ventilation grilles are installed on the same duct, it may be necessary to balance the volume flow rates.

  • AG: Damper unit with opposed action blades, adjustable, secured with a locking screw
  • AS: Damper unit with hit and miss damper, adjustable, secured with a locking screw

Air pattern

  • Adjustable blades: Set the air control blades individually or together and depending on the local conditions
  • D, DG: Air control blades, fitted at 90° to the front blades, can be adapted to the local conditions

Principal dimensions

L [mm]

Nominal length of the ventilation grille

H [mm]

Nominal height of the ventilation grille

m [kg]

Weight

Nomenclature

LWA [dB(A)]

Sound power level of the air-regenerated noise

V [m³/h] and [l/s]

Volume flow rate

Δpt [Pa]

Total differential pressure

lS [m]

Distance from single grille or horizontal run section (throw distance)

Share page

Recommend this page

Recommend this page by sending a link by mail.

Fields marked with an (*) are required fields.

Share page

Thank you for your recommendation!

Your recommendation has been sent and should arrive shortly.


Contact

We are here for you

Visual contact Visual contact

Please specify your message and type of request
Tel.: +49 (0)2845 / 202-0 | Fax: +49 (0)2845/202-265

Fields marked with an (*) are required fields.

Contact

Thank you for your message!

Visual contact Visual contact

Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +49 (0)2845 / 202-0 | Fax: +49 (0)2845/202-265

Contact

We are here for you

Visual contact Visual contact

Please specify your message and type of request
Tel.: +49 (0)2845 / 202-0 | Fax: +49 (0)2845/202-265

Attachment (max. 10MB)

Fields marked with an (*) are required fields.

Contact

Thank you for your message!

Visual contact Visual contact

Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +49 (0)2845 / 202-0 | Fax: +49 (0)2845/202-265